Oh hang on, you have parts for the Blue Screen AVHC still ? as I had to source a part from Onexia, and they reprogrammed a chip for it, can you...
I don’t think so this was for the blue screen AVHC controller.
News for anyone that has these parts .
Dear Valued Customers,
It is with sincere regret that I inform you that Kyndill Controller will...
Hi Guys, I have a Torchmate 2 x 4 (2012) with a NON ACCUMOVE CONTROLLER and I am selling my 2 x 4 and the new person I assume will need to buy...
Or as a short cut. Just press “C then “E”
Is the ground bus bar actually bolted to the table BUT to bare steel or painted steel?
I would also connect the earth cable properly to the plate...
Cool thanks again.
Dnmeistr its the growth series 2x4 not the Torchmate 2or 3.
Hi guys, I have the growth series 2x4, year 2011 model.
I notice the torch can be jiggled approx 1/16” at the nozzle end. This play is in the...
Very cool project and showing real world errors like I do :-).
Query, what was the sanding disk used on the air grinder on the back plate?
Lol ok thanks voodoo magic
ok thanks. .......... but i do still remember something I read on a forum about changing the sensitivity of the AVHC so it would react slower or...
Ohhhh I had assumed there was a setting in the Blue Screen avhc that would slow down the response times of measuring the arc feedback or...
Hi guys. I am using a used controller 501A for my 2x4 growth series until mine is replaced or repaired.
It dives on the sharp corners like a...
got ya. thanks for allllll your help :-)
Ok I understand but if one of my motors dies, can I use one of the higher rated motors without issue?
Thank you for the help and info Chad.
I have some spare motors for the x and y axis as well but notice they are 494 oz/in and I think mine are...
Separate names with a comma.