Pretty vague... call into our support line and the tech team can assist 7756732200 ext 4.
Everyone has been asking me about single line fonts, how they work, and can they cut/mark? The answer is YES to all of those questions. I've had...
GS - growth series table. 1/2/3 Bolt-together tables. Currently, there are some 'back end' configurations need to be done on the legacy tables....
Can you take screenshots of this and include the files to support@torchmate.com. I would like to validate the process and see if we get the same...
That is TOO COOL!
This is a OK TO MOVE issue. The controller/software is looking for the OK TO MOVE signal and not getting it. This can be either a configuration,...
Think of the plasma beam as a football. Goal is to get the center of the football in the center of the material. This is all CUT HEIGHT. Then...
Email me the files direct and Ill take a look at them. cspradlin@torchmate.com
Ok importing DXFs with smaller cuts that are shapes. [ATTACH] First thing I do is BREAK PATH and select the smaller areas. Then I go to the...
First is to UNCHECK, REMOVE DUPLICATES and CLOSE SHAPES from the IMPORT SCREEN. This usually causes crashing of DXFs. We do have a "fix/patch"...
cspradlin@torchmate.com <-- email.
Dirty, moist air is the leading cause of consumables getting eaten up. This can be validated by looking at the electrode and inside the nozzle....
Yes, the new breakaway is legit and does not hinder PM usage. SP2 is available as a stand alone product based on your table. email me direct and...
I'll update everyone that has GS/1/2/3 legacy systems running the Accumove Controller.
SP2 is compatible with the Plate Marker.
Our machines are covered by a 2-year warranty (3-year on Plasma Power supply). Once the mobo is replaced, it will be covered for 1-yr.
do you notice where you GS hangs at? First thing to verify is the proper height of the gantry off of the ground rails. When the gantry moves up...
FYI, we do offer a third motor kit for that system to eliminate the jackshaft. If the gantry is tight, then somehow you are getting a bind or...
This is all mechanical. 1. check all of your set screw points. Take them all out and drill a small indent into the shafts and BLUE loctite the...
Did you sequence the plate marker items first? looks like the material moved during plate marking and shifted the "fill" Since you are plate...
Separate names with a comma.
